I love the ERGO Gapper. It’s an ingeniously simple device that makes a huge difference in AR comfort. Please allow me to share with you the best $3 you can spend on your rifle.
Reviews @ TFB:
This isn’t truly a review, but it treads close to that line so disclosures are in order. I have no relationship with ERGO. I have bought Gappers over the years, but have no connection to the company apart from being a regular retail customer.
What Is It?
The standard AR-15 trigger guard is an ingenious design with a hidden feature. One complaint about the trigger guard area is that it’s too small for use with gloves. To fix this, the mil-spec design can open by pressing the small silver tab at the front of the trigger guard. If you have a standard AR lying around that might be a feature you didn’t know about previously.
The downside of that design is the small void it leaves between the pistol grip and the trigger guard. Many shooters (including me) are very bothered by that gap. It has some sharp edges, and it sits right on top of the knuckle of the middle finger. That gets very annoying under recoil or even just carrying it around. ERGO’s Gapper fills that void.
How To Install
In order to get the Gapper in position, the grip needs to be removed or at least loosened. On the Mark-12ish rifle, it only took loosening the grip to get the Gapper in place. But on my competition service rifle with an Aero lower, I had to fully remove the grip to get it installed. Whether the grip has to be removed or just loosened, make sure not to lose the safety detent or detent spring. Also, be sure to check the safety function once the gun is reassembled.
What Difference Does It Make?
I have a worn spot on the knuckle of my dominant hand from shooting older AR-15s. That little gap has annoyed me for years. I first bought a Gapper several years ago and installed it on a retro build (a customer had his C7 upper swapped out for a flattop, and I took his C7 for $20, thus spawning another gun) with an A1-style grip from Brownells. It was immediately a huge improvement. More Gappers have found their way onto my various retro guns over the years as I remember to buy more of them.
Now, there are other ways to address this same issue. Some trigger guards (like the Magpul one) fill that space while enlarging the trigger guard pocket. The enlarged pocket leaves room for gloves, so the swing-open feature of the mil-spec guard is redundant. There are also some pistol grips (like the BCM Mod 3) that include a small shelf to cover the gap. And yet another solution comes in the form of lower receivers that have machined-in trigger guards and no gap.
But on some guns, none of those seem quite right. I cannot bear the way an enlarged trigger guard looks on an otherwise retro rifle. Putting a Gapper onto a classic AR makes it more comfortable without changing anything in a way that makes the gun look wrong.
Conclusion
If you have a rifle with the traditional trigger guard, you should absolutely pick up the ERGO Gapper. You can keep the traditional lines of a retro gun while enjoying improved ergonomics. And possibly best of all, it is a very cheap upgrade. Try one out, and you might be surprised at the difference it makes.
We are committed to finding, researching, and recommending the best products. We earn commissions from purchases you make using the retail links in our product reviews. Learn more about how this works.
Read the full article here
